Brochure

Air Cleaning System 

FLO-P ​

Air cleaning for industry without filters or chemicals

FLO-P Air-cleaning Units for the reduction of grease and odor from industrial exhausts

​The JIMCO industrial air purification systems are normally made according to client’s specific requirements. There are two main considerations when designing the air treatment system. The first step is to calculate the unit size to treat the air successfully. This is based on the process air organic content, air temperatures, air flowrates, grease, and odor destruction requirements, etc.

The second step is to configure the installation to meet space requirements because frequently space is at a premium in process plants. Over the years JIMCO has designed units that can be floor, ceiling, wall, or roof mounted to suit the installation requirements of all our clients. Access for maintenance is also carefully considered.

In February 2000 JIMCO received the EU Environmental Award for Cleaner Technology for the development of the Photolytic Oxidation System. The unique operation of the JIMCO FLO-P air purification system ensures that optimum purification of high-temperature exhaust air is achieved.​

FLO-P System

The process works as follows:

Step 1: Warm contaminated air (primary air) enters the lower part of the unit.

Step 2: The primary air passes through a maze filter resulting in the separation of large grease and water droplets.

Step 3: Primary air is cooled by mixing it with secondary air from the room (e.g. via a spot exhaust from a production line).​ The mixed air then passes over a bank of condensation blocks causing further grease/water separation from the air stream. This reduces power consumption during the photolytic oxidation process.

Step 4: The photolytic oxidation process is achieved using special low-pressure UV-C lamps that also generate a small quantity of ozone. Exposure to UV-C light breaks down organic compounds in the air and subsequent treatment with ozone completes the oxidation process.

FLO-P ​

JIMCO Air-treatment systems is used for a large number of different applications

JIMCO air-treatment systems are manufactured and supplied for various tasks. The reaction chamber of JIMCO's industrial air cleaning system is made of acid proof stainless steel (316) and contains a number of JIMCO's Photozone lamps™. These are dimensioned for the volume of air required to treat.

​The systems is installed with automatic CIP cleaning systems. That means a minimum of maintenance of the daily basis as the unit cleans itself after use. The CIP system is controlled from the PLC-controller to program the cleaning sequence to your requirements. JIMCO and CIP suppliers have jointly selected the best environmentally friendly detergents for the cleaning process.

JIMCO's industrial air cleaning systems are normally equipped with PLC-controllers incorporating modem links and alarm signals.

Since 1993 JIMCO has specialized in the reduction of grease, odour, and aromatic compounds in exhaust air with high temperatures (frying, boiling and deep-frying processes) through the development of the unique UV-C & Ozone technology. This technology eliminates several environmental hazards generated by industrial and commercial processes.

The JIMCO industrial air cleaning system are based on the unique technology – photolytic oxidation.

The process of odour reduction and air treatment will be made by the application of the technology called Photolytic Oxidation Process, which uses a combination of ultraviolet radiation C and ozone.

Photolysis is a process in which UV-C radiation enables photon degradation of organic particles (e.g. fat and oil). Ozonolysis is an oxidation process in which organic particles are decomposed by ozone through a cold combustion. Ozone (produced by the lamps) is an unstable natural gas found in nature and helps to sterilize the earth's surface.

Interested to learn more about FLO-P AIR-CLEANING UNIT

Give us a call or request a quote

​request a quote​

Our biggest order yet of the FLO-P Sytems to the United States ​

Application areas​

Food Industry​

Municipal facilities

Animal husbandry

Animal-destruction

Feedstuffs

Waste water plants

GET IN TOUCH​​

​How can we help you?​

Please feel free to contact us, and one of our managers

will contact you.

 
 
 
Sign me up for JIMCO newsletter
Please make sure all required fields are filled out correctly
jimco logo hvid svg

​​​Mjølbyvej 7

DK-5900 Rudkøbing

​Denmark

​​

Ph​on​e: +45 62 51 54 56

E-mail: jimco@jimco.dk

CVR: 25000374

Follow us​

​© JIMCO A/S – All rights reserved.