Brochure​

Ozone and UV AIR DISINFECTION SYSTEM

Surface disinfection

Ozone & UV air disinfection system

SURFACE DISINFECTION​

Due to increasingly higher hygiene demands in the food processing industry etc., the use of UV-C light to eliminate microorganisms e.g. bacteria, fungi, and viruses, is becoming more and more commonly used.

Using UV-C light to eliminate microorganisms in the air is a technique that has been known for decades. UV-C light reduces the total amount of microorganisms in the room by breaking the DNA bonds in the organisms.

Using UV-C & Ozone technology, JIMCO is specialized in the elimination of microorganisms and odors. By developing the FLO-D systems you will automatically be able to disinfect your surfaces easy and safely. 

A minor contamination with microbiology may result in a faulty commodity – in consequence, it can be an expensive affair for the company. To avoid this, a steadily increasing number of companies decide to use UV air disinfection systems.

Depending on the calculated UV-C dosage, a kill rate of 99.9% of all microorganisms may be achieved. 

Together with the PLC-control, special UV-C sensors developed by JIMCO, ensure that the UV-C light is 100% effective to surface disinfection.​ 

FLO-D

automatic disinfection of Surface disinfection​

Efficient disinfection – without manual procedures, chemicals or water

With the introduction of the UV-C-based disinfection of surfaces, we now add yet another field of application to our patented UV-C technology, which has been awarded the EU Environmental prize and which since 1993 has been used in self-produced air cleaners – systems which are used for removing obnoxious smells, improving the indoor climate as well as reducing the danger of fire and infection hazards.

Now it is possible to use the UV air disinfection systems, which would normally require a manual treatment, involving a large number of advantages for the operating economy, the environment as well as the work environment.​​

Why choose an automatic surface disinfection?

Avoid time-consuming manual disinfection with water and chemicals

save liters of water by the thousand as well as energy for heating and drying

disinfect more efficiently in corners, chinks and ventilation ducts, cooling surfaces

avoid strong chemicals, which have an impact on the environment and work environment

Avoid an environmentally harmful release of chlorinated wastewater

Fast payback

The surface disinfection module can with advantage be used with JIMCO’s ozone & UV air disinfection systems that are typically installed in connection with existing ventilation systems. 

In this way, the customer will have a total solution, which cleans the air in the production rooms during working hours – and disinfects all surfaces after closing time, when the daily cleaning of machines and surfaces is complete and there are no longer any people in the room.

The start-up can take place automatically via a foregoing programming, e.g. when a given process is ended, or manually by pressing a button when the last person leaves the room. Besides production rooms, the solution can with great advantage be applied in i.a. cooling and storage rooms, laboratories as well as in the health sector for the surface disinfection of bed units, etc.

In most environments, the system will provide savings on manpower, water, and heat in amounts that are so high that the repayment period will only last approximately one year.

To see this Youtube video you must accept marketing cookies

Change cookie consent

FLO-D Fixed

Another smart ozone & UV air disinfection system

FLO-D Fixed, allows you to have any size of production area, no area is to big FLO-D Fixed is a development used for installation where absolute no failure is allowed, and more than one person has the responsibility of the disinfection FLO-D Fixed also allows you to install the system in a pipe installation. 

As an example you can use one unit for disinfection of more chillers, by use of dampers. Contact Jimco for more information on FLO-D Fixed

Very positive results – of tests as well as practical use

FLO-D System

Prior to the introduction of our solutions for UV-C and ozone air disinfection systems, we have for some time conducted full-scale tests in various companies in co-operation with DTU (Technical University of Denmark) and The National Institute for Aquatic Resources. The results were very positive.

Furthermore, various tests carried out in co-operation with The South Danish university have shown that concentrations of for instance listeria and salmonella bacteria can be almost completely removed by means of our technology and within only one hour a day.

Hygiene that is on a level with or better than traditional surface disinfection

​At the fish factory Vega Salmon A/S, in Esbjerg DK, JIMCO's UV air disinfection systems has been installed in the production. Tests from the factory show that the total bacterial concentration after a UV-C & Ozone-based disinfection is better/lower than after a traditional disinfection. 

At the same time, the concentration of fungal spores is reduced. This goes to prove that saving tons of water and chemicals has no hygienic consequences.​

​Download our Ozone & UV air disinfection system brochures

FLO-D

For other language please go to Insights

GET IN TOUCH​​

​How can we help you?​

Please feel free to contact us, and one of our managers

will contact you.

 
 
 
Sign me up for JIMCO newsletter
Please make sure all required fields are filled out correctly
jimco logo hvid svg

​​​Mjølbyvej 7

DK-5900 Rudkøbing

​Denmark

​​

Ph​on​e: +45 62 51 54 56

E-mail: jimco@jimco.dk

CVR: 25000374

Follow us​

​© JIMCO A/S – All rights reserved.